Note: Measurements may appear in inches or centimeters depending on the Measurement Unit

settings. (See Configuration - Measurement Units)


Production - Board/Roll Defaults

Adding Board/Roll Defaults

Step     Action

  1.       Ensure that in the Wide Format Type dropdown, you have selected either Board or Roll.



  2.       Select {Production} on the right-hand side of screen to auto scroll to

            Production section.



  3.      Complete fields under Board or Roll.


Field
Description
Cost Per ml
Enter value for the Cost Per ml of ink.
Price Per ml
Enter value for the Price Per ml of ink.


  4.     Select {Save}. A results window will pop up to indicate the Board/Roll has 

          been saved.


Production - Board/Roll Widths

Adding Board/Roll Widths

Step     Action

  1.       Select {Production} on the right-hand side of screen to auto scroll to

            Production section.

  2.       Select {New} under Width section of Board or Roll. A New Width modal

            window will open.



  3.     Enter the New Width value.

  4.     Select {Save} to add a single width or {Save and Add New} to add multiple widths. 

          A results window will pop-up to indicate the width has been saved.

 

Editing Board/Rolls Widths

Step     Action

  1.       Select {Production} on the right-hand side of screen to auto scroll to

             Production  section. 

  2.       Hover mouse over the name of Board or Roll width to be edited. A pencil icon

            will appear on the right-hand side of the name. Select the pencil icon. An Edit 

             Width  modal window will open.



  3.      Make required changes.

  4.      Select {Save} to save the edited width or {Save and Add New} to save edited width and 

           add additional widths. A results window will pop-up to indicate the width has been saved.



Deleting Board/Roll Widths

Step     Action

  1.       Select {Production} on the right-hand side of screen to auto scroll to

            Production  section. 

  2.       Select entries under Width of Board or Roll to be deleted by checking boxes 

            on  the left-hand  side. All entries can be deleted by checking box to left of 

            {New} under Width.

    

  3.      Select {Delete}. A window will pop-up to confirm selected items to be 

           deleted.

           Note: Deleting a Width will also delete any associated scales.


  4.     Select {OK} to delete selected items. A results window will pop-up to indicate

          the selected Widths have been deleted. 



Production - Board/Roll Modes


In production, board/roll modes can be used to control both speed and ink mls per square foot. 


Adding Production Board/Roll Modes

Step     Action

  1.       Select {Production} on the right-hand side of screen to auto scroll to

            Production section.

  2.       Select {New} under Board or Roll Modes. A New Mode modal window

            will open.


  3.      Complete the fields.


Field
Description
Name
Enter a name for the new mode.
Default
Select box to set mode as default for this printer.
Ink ml/sqft or sqm
Enter value for milliliters of ink charge per square foot/meter for the mode.
Widths (sqft or sqm per hour)
Enter in the square feet/meter per hour beside the appropriate width.

Note: Widths are not required unless they vary based on square feet/meter per hour.


  4.      Select {Save} to add one mode or {Save and Add New} to add multiple modes.

           A results window will pop-up to indicate the mode has been saved.


Editing Production Board/Roll Modes

Step     Action

  1.       Select {Production} on the right-hand side of screen to auto scroll to

            Production  section.

  2.       Hover mouse over the name of mode to be edited. A pencil icon will appear

            on the right-hand side of the name. Select the pencil icon.



          A modal Edit Mode modal window will open.


3.      Make required changes.
4.      
Select {Save} to edit one mode or {Save and Add New} to save edited mode and add 

         additional modes. A results window will pop-up to indicate the mode has been saved.


Deleting Production Board/Roll Modes

Step     Action

  1.       Select {Production} on the right-hand side of screen to auto scroll to

            Production  section.

  2.       Select entries under Modes to be deleted by checking boxes on the left-hand

            side. All entries can be deleted by checking box to left of {New} under 

            Modes.


   

 3.       Select {Delete}. A window will pop-up to confirm selected items to be 

           deleted.

 4.       Select {OK} to delete selected items. A results window will pop-up to indicate

           the selected modes have been deleted.