This is an unfinished product that you produce for the customer and complete at a later date, such as when it is imprinted. The customer is charged for the production of the product, and a secondary charge is applied at the time of depletion.


A Pre-Paid Shell Stock bills the initial production at the time of Replenishment, and allows the depletion to apply an additional charge.
A Non Pre-Paid Shell Stock bills the initial production at the time of Depletion, and also allows the depletion to apply an additional charge.

  • Since this Customer Good requires further production or charges when pulling from inventory, the Replenishment and Depletion Products need to differ.
  • Example: A Business Card Shell (a Master or a Base) that is printed, and then Imprinted at a later date.


CREATING SHELL STOCK CUSTOMER GOODS


Navigate To:

Inventory > Customer Goods > {New}


  • Type - Select Shell Stock
  • Pre-Paid - Toggle to Yes or No depending on the desired charging strategy, as described above
  • Allow Back Orders - Toggle to Yes to allow the customer to place an order for the Inventoried Customer Good Product even when there is not sufficient inventory available
  • Name - Enter the Name of the Customer Good
  • Description - Optionally enter a Description for the Customer Good
  • Location - Optionally enter the location of where the Customer Good is being stored within the facility
  • Minimum Level - Optionally define the minimum level of the Customer Good
  • Replenishment Product - Select the product used to produce the Shell Stock (e.g., 20up Business Card Shells printed 4/4). Only one Replenishment Product can be added to a Customer Good.


Click the {Save} button.

With the Customer Good page now open, {Add} a Depletion Product, for consuming inventory from the Customer Good. Multiple Depletion Products can be added to a Customer Good.


Note: Replenishment and Depletion Products are based off of Products. For more information on creating products, see Products - Adding a New Product.



REPLENISHING SHELL STOCK CUSTOMER GOOD INVENTORY


The manual {Replenish} option under Actions is only available for the first replenishment of a Shell Stock Customer Good. After the first replenishment, all replenishments must be done through an order using the Replenishment Product.


Pre-Paid: No

  • If you already have inventory in the facility from a production order performed outside of the system (first replenishment only).
    • Within the Customer Good > Actions > {Replenish}
    • Enter the Quantity you have in inventory
    • Input a Price Per Piece you want to charge in addition to the depletion product charges when depleting. Enter 0 if there is no additional charge.
    • Click {Save}

  • If you need to run a production of the replenishment in DocketManager.
    • Create a new order for the customer at Orders > {New} > {Save}
    • Add a Customer Good Replenishment to the order from {Goods} > {Replenish}
    • Check the box next to the Customer Good and click {Add}
      • Any Item Level Pricing of a Pre-Paid: No Shell Stock Customer Good will not be charged at the time of Replenishment, but will be charged at the time of Depletion.


Pre-Paid: Yes

  • If you already have inventory in the facility from a production order performed outside of the system (first replenishment only).
    • Within the Customer Good > Actions > {Replenish}
    • Enter the Quantity you have in inventory
    • Input a Price of $0 so the client is not charged for a replenishment they have already paid for outside of the system
    • Click {Save}

  • If you need to run a production of the replenishment in DocketManager.
    • Create a new order for the customer at Orders > {New} > {Save}
    • Add a Customer Good Replenishment to the order from {Goods} > {Replenish}
    • Check the box next to the Customer Good and click {Add}
      • Any Item Level Pricing of a Pre-Paid: Yes Shell Stock Customer Good will be charged at the time of Replenishment, and depletion product charges will be applied when depleting.


Note: The Quantity and Price fields cannot be left blank. If there is no price, enter 0.



DEPLETING SHELL STOCK CUSTOMER GOODS

Customer Goods must have a Depletion Product added before a Customer Good can be Depleted.

  • Create a new Order
  • Within the Order Select {Goods} > {Deplete}
  • Select the Customer Good you want to Deplete from and click {Add}


Notes:

  • Versions cannot be used with Customer Goods, as items will not allocate correctly.
  • Shell Stock Depletion Products do not require a stock. A blue band imposition message will appear if the stock is left blank, but the message can be disregarded. If you would prefer the message not appear, add a stock and mark it as outsourced. This prevents the stock from being added to the price of the depletion, and the stock will not be allocated when a depletion order is placed using the Shell Stock.



EDITING CUSTOMER GOODS

Once a Customer Good exists, it can be edited by clicking the Customer Good Name from the Customer Goods List, then hovering over the Actions dropdown and selecting {Edit}.

Inventory > Customer Goods > Click Customer Good Name > Actions > {Edit}

  • Pre-Paid - Changing the Pre-Paid toggle does not affect existing inventory. The change takes effect starting with the next replenishment.
  • Replenishment Product - Select the pencil icon to add or change the Replenishment Product, then click {Save}.


DELETING CUSTOMER GOODS

Once a Customer Good exists, it can be deleted by checking the box next to the Customer Good in the Customer Goods List and clicking the {Delete} button.

  • A Customer Good can only be deleted if the Customer Good Inventory level is at 0.