Stock dimensions are determined by the length and width entered into stock settings. If the stock says 0x0, it may be that the length and width were not filled out when the stock was setup.

To navigate to a stock:

Step     Action

  1.      Select {Inventory}. The page should open on the Stocks tab.

  2.      Locate the desired stock using the stock search functions.

  3.      Select the desired stock by clicking on the stock name. The Stock view page will open.

The stock's dimensions can be viewed to the left of Size under the stock details section of the Stock view page.

To change the stock dimensions:

Step      Action

  1.        Select the {Actions} button and Edit to open the edit stock modal window.

  2.        Select a Size from the drop-down menu.

  3.        Select {Save}. A results window will pop-up to indicate the Stock has been saved.